HOW-TO GUIDES

Step-by-Step Guide to Installing Trex Hideaway® Fascia Plugs

SHARE

Welcome to Trex Academy, where you'll master the art of deck construction. In this guide, we'll walk you through the process of installing Trex Hideaway® Fascia Plugs, ensuring a seamless and professional finish when installing for your Trex fascia boards.

Disclaimer: Instructions provided by Trex® are based on the build specifications that Trex® demonstrated in the Trex® Academy video series and are not universal to all homeowners’ projects. A homeowner’s build may vary from Trex’s instructions based on the homeowner’s local municipality requirements, individual design preference and project specifications. For questions or assistance needed during your project, please reach out to howto@trex.com.

20 seconds per fastener

*Times may vary

Print Instructions Download Deck Plan

Jump To:

Tools Materials

0:00

0:00 / 0:00

Step-by-Step Instructions

01: Features and Benefits
02: Installing Trex Hideaway® Fascia Plugs
03: Removing Plugs and Fasteners (if needed)

Chapter 01: Features and Benefits

Print This Chapter

Chapter 02: Installing Trex Hideaway® Fascia Plugs

Print This Chapter

Chapter 03: Removing Plugs and Fasteners (if needed)

Print This Chapter

Fascia Plugs

Exclusively Trex: Tailored exclusively for Trex composite builds, expertly blended color match and embossing technology for an exceptional finish
Easy Installation: Simple tap or hammer method to install plugs
Hassle-Free Design: Straightforward plug removal without twisting and ample space between plugs to tap each plug into place.
Secure Fit: Ribbed edges on plugs ensure a snug and secure placement, suitable for efficient impact driver installation

Composite Fascia Screws

Efficient Drive: STICK-TIGHT® technology with tri-lobe shank ensures consistent adherence and smoother drives into dense boards
Clean Drive: Sharp upper threads expertly clear away debris
UV Protection: Equipped with top-tier UV inhibitors to safeguard against sun damage
Guided Installation: Color-coded equipment for quick, intuitive setup
Minimized Distortion: Precision machine slot cut ensures a clean drive and board integrity
Reliable Fit: Advanced Phillips HEXSTIX® Drive System offers unmatched tightness and reliability

Fascia Plug Counterbore

Color-Coded Precision: Distinct teal for plug-specific fastening differentiates from screw-specific counterbore
Optimal Design: Forged spade with rotating wing for optimal cuts
Seamless Finish: Pairs perfectly with Trex Hideaway® Fascia Plugs
Material Integrity: Preserves material while ensuring efficient removal
Easy Pre-Drilling: Designed for a discreet and seamless look

Fascia Plug Depth Setter

Custom Design: Expertly designed tool specifically crafted for perfect fascia installations.
Phillips HEXSTIX® Drive System: Quickly and precisely drills the correct depth every time with ultimate confidence.
Premium Materials: Rubber bumpers protect the surface of your deck while drive bits are milled, not forged, ensuring longevity and performance.
Simplified Tooling | Convenient color-coded identification and tools available ̀a la carte for easy replacements

Step 1: Prepare Your Fascia Boards

Trim your Trex® fascia boards to achieve clean edges before laying out the fastener placement.

Step 2: Fastener Placement Guidelines

Follow these guidelines for optimal performance with Trex Hideaway Color Match Fascia Screws:

Place screws 1 inch from board ends.
Position screws 1 inch from the edge of the rim joist along the edges.
Align screws vertically in the field of the board, spaced no more than 18 inches apart.
Use 2 screws for 8-inch fascia (at ends and in the field) or 3 screws for 12-inch fascia (at ends and in the field).

Step 3: Pre-drill Holes for Fascia Fasteners

Use the teal-colored counterbore tool at a 90-degree angle to the board's face. Drill until the counterbore cup stops spinning, then remove any debris from the hole.

Step 4: Install Composite Fascia Plug Screws

Drive the 1-3/4” black epoxy-coated screws using the teal HEXSTIX depth setter tool labeled "Fascia" until you hear the drive change, indicating the screw is set to the designed depth.

Step 5: Installing Fascia Plugs

Center the Trex fascia plug over the hole, aligning the grain with the board's grain. Gently tap the plug flush to the face of the board using a smooth-faced hammer.

If you need to remove a plug and fastener:

Step 1: Drive Screw into the Plug

Drive a sharp point screw into the plug about one-quarter inch (¼”).

Step 2: Pry Out the Plug

Place a block of wood or decking next to the screw and gently pry the plug out using a claw hammer or pry bar.

Step 3: Remove the Screw

Use the HEXSTIX drive bit or a standard T-20 bit with downward pressure to slowly reverse the drill and draw out the screw.

Tools

Bar Clamps

Circular Saw

Drill

Measuring Tape

Miter Saw

Pencil

Rubber Mallet

Speed Square

See All

Materials

Fascia Plugs

See All

More Ways to Explore

Get Inspired

Explore Style Ideas and Tips

Step-by-Step Help

Browse Videos

Access Online Planning Tools

Plan Your Deck

This content was partially or fully generated by AI and has been reviewed by our team to ensure accuracy and relevance.

(NOT ALL PRODUCTS ARE AVAILABLE IN EVERY COUNTRY.)

Color Selector

WHERE TO BUY

TREX ACADEMY